Firmware Backup To Tftp; Firmware Backup To Ftp - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Firmware Backup to TFTP

This window is used to initiate a firmware backup to a TFTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to TFTP,
as shown below:
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
VRF Name
Source File
Destination File
Click the Backup button to initiate the firmware backup.

Firmware Backup to FTP

This window is used to initiate a firmware backup to an FTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to FTP,
as shown below:
Figure 15-7 Firmware Backup to TFTP Window
Description
Select the switch unit that will be used for this configuration here.
Enter the TFTP server's IP address here. When select the IPv4 option,
enter the IPv4 address of the TFTP server in the space provided.
When the IPv6 option is selected, enter the IPv6 address of the TFTP
server in the space provided.
Enter the VRF name here. This name can be up to 12 characters long.
Enter the source filename and path of the firmware file located on the
switch here. This field can be up to 64 characters long.
Enter the destination filename and path of the firmware file to be
backed up to the TFTP server here. This field can be up to 64
characters long.
Figure 15-8 Firmware Backup to FTP Window
604