D-Link DXS-3600 Series Reference Manual page 441

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

This is a dynamic page. Every selection made in the Protocol Type option will change the bottom part of

The fixed fields that can be configured are described below:

Sequence No.

Protocol Type

After selecting the TCP option as the Protocol Type, the following page and parameters will be available,

as shown below:

Figure 8-86 Extended Expert ACL (Add Rule) Window

Enter the ACL rule number here. This value must be between 1 and

65535. If this value is not specified, the system will automatically

generate an ACL rule number for this entry.

Select the action that this rule will take here. Options to choose from

are Permit and Deny.

Select the protocol type option here. Options to choose from are TCP,

UDP, ICMP, EIGRP, ESP, GRE, IGMP, OSPF, PIM, VRRP, IP-in-IP,

PCP, Protocol ID, and None.