D-Link DXS-3600 Series Reference Manual page 76

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Information Option
Click the Apply button to accept the changes made.
Click the Edit button to modify the corresponding interface.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
DHCP Relay Information Option Format Settings
This window is used to view and configure the DHCP information format.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Information
Option Format Settings, as shown below:
The fields that can be configured in DHCP Relay Information Option Format Global are described
below:
Parameter
Information Format Remote
ID
Information Format Circuit ID
Click the Apply button to accept the changes made.
DHCP Local Relay VLAN
This window is used to view and configure local relay on a VLAN or a group of VLANs.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Local Relay VLAN,
as shown below:
Description
relay option is left unchanged and directly relayed to the DHCP
server.
•
Replace - Select that the DHCP request packet that already has
the relay option will be replaced by a new option.
Select this option to enable or disable the insertion of relay agent
information (Option 82) during the relay of DHCP request packets.
Figure 4-49 DHCP Relay Information Option Format Settings Window
Description
Select the DHCP information remote ID sub-option. Options to choose
from are Default, User Define, and Vendor2.
•
Default - Select to use the Switch's system MAC address as the
remote ID.
•
User Define - Select to use a user-defined remote ID. Enter the
user-defined string with the maximum of 32 characters in the text
box.
•
Vendor2 - Select to use vender 2 as the remote ID.
Select the DHCP information circuit ID sub-option. Options to choose
from are Default, User Define, and Vendor1.
•
Default - Select to use the default circuit ID sub-option.
•
User Define - Select to use a user-defined circuit ID. Enter the
user-defined string with the maximum of 32 characters in the text
box.
•
Vendor1 - Select to use vender 1 as the circuit ID.
65