Snmp Host Table Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

SNMP Host Table Settings

This window is used to view and configure the recipient of the SNMP notification.
To view the following window, click Management > SNMP > SNMP Host Table Settings, as shown
below:
The fields that can be configured in SNMP Host Settings are described below:
Parameter
Host IPv6 Address
Host IPv6 Address
VRF Name
User-based Security Model
Security Level
UDP Port
Community String / SNMPv3
User Name
Click the Add button to add a new entry based on the information entered.
Figure 4-12 SNMP Host Table Settings Window
Description
Enter the IPv4 address of the SNMP notification host.
Enter the IPv6 address of the SNMP notification host.
Enter the VRF instance's name that will be used in this configuration
here. This name can be up to 12 characters long.
Select the security model here. Options to choose from are SNMPv1,
SNMPv2c, and SNMPv3.
•
SNMPv1 - Select to allow the group user to use the SNMPv1
security model.
•
SNMPv2c - Select to allow the group user to use the SNMPv2c
security model.
•
SNMPv3 - Select to allow the group user to use the SNMPv3
security model.
When selecting SNMPv3 in the User-based Security Model drop-
down list, this option is available.
•
NoAuthNoPriv - Specify that there will be no authorization and
no encryption of packets sent between the Switch and a remote
SNMP manager.
•
AuthNoPriv - Specify that authorization will be required, but
there will be no encryption of packets sent between the Switch
and a remote SNMP manager.
•
AuthPriv - Specify that authorization will be required, and that
packets sent between the Switch and a remote SNMP manger
will be encrypted.
Enter the UDP port number. The default trap UDP port number is 162.
The range of UDP port numbers is from 0 to 65535. Some port
numbers may conflict with other protocols.
Enter the community string to be sent with the notification packet.
42