Bgp; Bgp Global Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

BGP

BGP Global Settings

This window is used to view and configure the Border Gateway Protocol (BGP) feature's global settings.
To view the following window, click L3 Features > BGP > BGP Global Settings, as shown below:
The fields that can be configured in BGP AS Number are described below:
Parameter
BGP AS Number
Click the Apply button to accept the changes made.
Click the Delete button to delete an entry based on the information entered.
The fields that can be configured in BGP Parameters are described below:
Parameter
BGP Router Identifier
Synchronization
Enforce First AS
Scan Time
Figure 6-145 BGP Global Settings Window
Description
Enter the BGP Autonomous System (AS) number here. The range is
from 1 and 4294967295.
Description
Enter the local BGP router's ID in the IPv4 address format here. The
router ID must be a uniquely assigned within the network.
Select to enable or disable the synchronization feature here. When
synchronization is enabled, the BGP speaker will not advertise a route
to an external neighbor unless the route is a local route or the BGP
speaker has learned the route by IGP.
Select to enable or disable the enforce first AS feature here. Use this
feature to enforce that the routes received from an eBGP peer must
have the peer's AS number as the first AS in the AS path. This feature
is used to avoid the local router from spoofing by a misconfigured peer.
Enter the BGP scan timer value here. The range is from 5 to 60
seconds. By default, this value is 60 seconds. When the router is
enabled for scanning the next hop of BGP routes, the router will
274