Mac Address Table - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Aging Destination Hit
Click the Apply button to accept the changes made.
After selecting the MAC Address Learning tab option, at the top of the page, the following page will be
available.
The fields that can be configured are described below:
Parameter
Unit
From Port ~ To Port
State
Click the Apply button to accept the changes made.

MAC Address Table

This window is used to view the entries listed in the MAC address table.
To view the following window, click L2 Features > FDB > MAC Address Table, as shown below:
Description
Select to enable or disable the aging destination hit function.
Figure 5-4 MAC Address Table Settings (MAC Address Learning) Window
Description
Select the stacking unit ID of the switch that will be configured here.
Select the range of ports that will be used for this configuration here.
Select to enable or disable the MAC address learning function on the
ports specified here.
93