Ip Multicast Routing Protocol; Igmp - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

IP Multicast Routing Protocol

IGMP

IGMP Interface Settings
The window is used to find and display the Internet Group Management Protocol (IGMP) feature's
interface settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IGMP > IGMP
Interface Settings, as shown below:
The fields that can be configured in IGMP Interface Settings are described below:
Parameter
Interface VLAN
Click the Find button to locate a specific entry based on the information entered.
IGMP Static Group Settings
This window is used to view and configure the IGMP static group settings. Use this window to create an
IGMP static group in the case that the attached host does not support the IGMP protocol. Once
configured, the group member entry is added to the IGMP cache.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IGMP > IGMP Static
Group Settings, as shown below:
The fields that can be configured are described below:
Parameter
Interface VLAN
Group
Figure 6-82 IGMP Interface Settings Window
Description
Enter the VLAN interface's ID here. The range is from 1 to 4094.
Figure 6-83 IGMP Static Group Settings Window
Description
Enter the VLAN interface's ID here. The range is from 1 to 4094.
Enter the IP multicast group's address here.
229