Ddm Rx Power Threshold Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in DDM TX Power Threshold Settings are described below:
Parameter
Unit
Port
Action
Type
Power Unit
Value
Click the Apply button to accept the changes made.

DDM RX Power Threshold Settings

This window is used to view and configure the threshold of RX power for specific ports on the Switch.
To view the following window, click OAM > DDM > DDM RX Power Threshold Settings, as shown below:
The fields that can be configured in DDM RX Power Threshold Settings are described below:
Figure 10-29 DDM TX Power Threshold Settings Window
Description
Select the switch unit that will be used for this configuration here.
Select the port used for the configuration here.
Select the action that will be taken here. Options to choose from are
Add and Delete.
Select the type of TX power threshold. Options to choose from are
Low Alarm, Low Warning, High Alarm, and High Warning.
Select the power unit here. Options to choose from are mW and dBm.
Enter the threshold value. When selecting mW in the Power Unit
drop-down list, this value must be between 0 and 6.5535. When
selecting dBm in the Power Unit drop-down list, this value must be
between -40 and 8.1647.
Figure 10-30 DDM RX Power Threshold Settings Window
562