Extended Ipv6 Acl - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Extended IPv6 ACL

After clicking the Add ACL button, users can create a new ACL, as shown below:
The fields that can be configured are described below:
Parameter
ACL Type
ID
ACL Name
Click the Apply button to create the new ACL.
After creating an Extended IPv6 ACL, the newly created Extended IPv6 ACL will be displayed in the
ACL display table, as shown below:
Click the Edit button to re-configure the specific ACL.
Click the Delete button to remove the specific ACL.
To add an ACL rule in the ACL, select it (the ACL will toggle to the bold font), and click on the Add Rule
button.
Figure 8-63 Extended IPv6 ACL (Add ACL) Window
Description
Select the ACL type here. For this section we'll select the Extended
IPv6 ACL option.
Enter the access list's ID here. The range from 13000 to 14999.
Enter the ACL's name here. This name can be up to 32 characters
long.
Figure 8-64 Extended IPv6 ACL (Main) Window
412