Radius Group Server Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in RADIUS Server Settings are described below:
Parameter
IP Address
IPv6 Address
Authentication Port
Accounting Port
Retransmit
Timeout
Key Type
Key
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.

RADIUS Group Server Settings

This window is used to view and configure the RADIUS group server settings.
To view the following window, click Security > RADIUS > RADIUS Group Server Settings, as shown
below:
Figure 9-30 RADIUS Server Settings Window
Description
Enter the RADIUS server's IPv4 address here.
Enter the RADIUS server's IPv6 address here.
Enter the authentication port number used here. This value must be
between 0 and 65535. By default, this value is 1812. If no
authentication is used, use the value 0.
Enter the accounting port number used here. This value must be
between 0 and 65535. By default, this value is 1813. If no accounting
is used, use the value 0.
Enter the retransmit value used here. This value must be between 0
and 20. By default, this value is 3. To disable this option, enter the
value 0.
Enter the timeout value used here. This value must be between 1 and
255 seconds. By default, this value is 5 seconds.
Select the key type that will be used here. Options to choose from are
Plain Text and Encrypted.
Enter the key, used to communicate with the RADIUS server, here.
This key can be up to 32 characters long.
Figure 9-31 RADIUS Group Server Settings Window
484