D-Link DXS-3600 Series Reference Manual page 236

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Metric
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to delete the specified entry.
OSPFv3 Virtual Link Settings
This window is used to view and configure the OSPFv3 feature's virtual link settings.
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Virtual Link Settings, as
shown below:
The fields that can be configured in OSPFv3 Virtual Link are described below:
Parameter
Process ID
Instance ID
Area ID
Router ID
Hello Interval
Dead Interval
Description
IPv6 OSPF.
Enter the metric value here. This value is used when redistributing
other processes to an IPv6 OSPF process. The range is from 0 to
16777214. The default metric is value 20 when no metric value is
specified.
Figure 6-77 OSPFv3 Virtual Link Settings Window
Description
Enter the ID for an IPv6 OSPF routing process here. It is locally
assigned and should be unique for each IPv6 OSPF routing process
on the router. The range is from 1 to 65535.
Select and enter the instance's ID here. The range is from 0 to 255.
Enter the OSPF area's ID here. It can be specified as an IPv4 address.
Enter the router's ID here associated with the virtual link neighbor.
Enter the hello interval value between the hello packets that the router
sends on an interface here. The range is from 1 to 65535 seconds.
Select the Default option to use the default value, which is 10
seconds.
Enter the dead interval value, during which no packets are received
and after which a neighbor is regarded as off-line, here. The range is
225