802.1X Global Settings; 802.1X Port Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
and effectively creates a logical Port that the attached device can then use to communicate with the LAN
via the Switch.

802.1X Global Settings

This window is used to view and configure the 802.1X global settings.
To view the following window, click Security > 802.1X > 802.1X Global Settings, as shown below:
The fields that can be configured in 802.1X Global Settings are described below:
Parameter
802.1X State
802.1XTrap State
Click the Apply button to accept the changes made.

802.1X Port Settings

This window is used to view and configure the 802.1X port settings.
To view the following window, click Security > 802.1X > 802.1X Port Settings, as shown below:
Figure 9-11 Example of Typical Host-based Configuration
Figure 9-12 802.1X Global Settings Window
Description
Select to enable or disable the 802.1X global state here.
Select to enable or disable the 802.1X trap state here.
472