D-Link DXS-3600 Series Reference Manual page 502

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in DHCP Snooping Database are described below:
Parameter
Write Delay
Click the Reset button to reset the information entered.
Click the Apply button to accept the changes made.
The fields that can be configured in Store DHCP Snooping Database are described below:
Parameter
URL
Click the Apply button to accept the changes made.
The fields that can be configured in Load DHCP Snooping Database are described below:
Parameter
URL
Click the Apply button to accept the changes made.
Click the Clear button to clear all the counter information.
DHCP Snooping Binding Entry
This window is used to view and configure the DHCP snooping binding entries.
Figure 9-40 DHCP Snooping Database Window
Description
Enter the write delay time value here. This value must be between 60
and 86400 seconds. By default, this value is 300 seconds.
Description
Select the location from the drop-down list and enter the URL where
the DHCP snooping database will be stored to here. Locations to
choose from are TFTP, FTP, and Flash. An example URL is given.
Description
Select the location from the drop-down list and enter the URL where
the DHCP snooping database will be loaded from here. Locations to
choose from are TFTP, FTP, and Flash. An example URL is given.
491