D-Link DXS-3600 Series Reference Manual page 316

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Prefix List Name
Capability ORF Prefix List
Action
Capability ORF Prefix List
Type
Click the Apply button to accept the changes made.
Neighbor Maximum Prefix Settings
This window is used to view and configure the BGP neighbor feature's maximum prefix settings. This
feature is used to specify the maximum number of prefixes that can be accepted from a neighbor.
To view the following window, click L3 Features > BGP > BGP Neighbor > Neighbor Maximum Prefix
Settings, as shown below:
The fields that can be configured in Neighbor Maximum Prefix Settings are described below:
Parameter
Address Family
Neighbor
Prefix Action
Prefix Max Count
Prefix Warning Threshold
Description
Enter the prefix list's name here. This name can be up to 16 characters
long.
Select to enable or disable the capability ORF prefix list action here.
Select the capability ORF prefix list type here. Options to choose from
are Receive, Send, and Both.
Figure 6-183 Neighbor Maximum Prefix Settings Window
Description
Select the address family used here. Options to choose from are IPv4
Unicast, IPv4 VRF, and VPNv4.
•
IPv4 Unicast: Select to use the IPv4 unicast family here.
•
IPv4 VRF: Select and enter the IPv4 VRF instance's name that
will be used here. This name can be up to 12 characters long.
Alternatively, click the Please Select button to open a new
window to select and use a configured VRF instance from the
list.
•
VPNv4: Select to use the VPNv4 address family here.
There are two neighbor options here, IPv4 Address and Peer Group.
Select the IPv4 Address option and enter the IP address of the
neighbor peer here.
Select the Peer Group option and enter the BGP peer group's name
here. This name can be up to 32 characters long.
Select to enable or disable the prefix action here.
Enter the maximum number of prefixes acceptable from the specified
neighbor here. The range is from 1 and 16000. By default, this value is
16000.
Enter the percentage value of the maximum prefix limit to generate a
warning message here. The range is from 1 to 100 percent. By default,
this value is 75 percent.
305