Snmp Linkchange Trap Settings; Snmp View Table Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Port Link Down
Coldstart
Warmstart
Click the Apply button to accept the changes made.

SNMP Linkchange Trap Settings

This window is used to view and configure the SNMP link change trap settings.
To view the following window, click Management > SNMP > SNMP Linkchange Trap Settings, as
shown below:
The fields that can be configured in SNMP Linkchange Trap Settings are described below:
Parameter
Unit
From Port ~ To Port
Trap Sending
Trap State
Click the Apply button to accept the changes made.

SNMP View Table Settings

This window is used to assign views to community strings that define which MIB objects can be accessed
by a remote SNMP manager. The SNMP Group created with this table maps SNMP users (identified in
the SNMP User Table) to the views created in the previous window.
To view the following window, click Management > SNMP > SNMP View Table Settings, as shown
below:
Description
Tick this option to control the sending of port link down notifications. A
linkDown trap is generated when the device recognizes a failure in one
of the communication links.
Tick this option to control the sending of SNMP coldStart notifications.
Tick this option to control the sending of SNMP warmStart
notifications.
Figure 4-6 SNMP Linkchange Trap Settings Window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select this option to enable or disable the sending of the SNMP
notification traps that is generated by the system.
Select this option to enable or disable the SNMP link change trap.
36