D-Link DXS-3600 Series Reference Manual page 559

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
To view the following window, click OAM > CFM > CFM Linktrace Settings, as shown below:
The fields that can be configured in CFM Linktrace Settings are described below:
Parameter
MAC Address
MEPID
MA Name
Domain Name
TTL
PDU Priority
Click the Apply button to accept the changes made.
The fields that can be configured in Find and Clear CFM Linktrace are described below:
Parameter
MEPID
MA Name
Domain Name
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear the entries based on the information specified.
Click the Clear All button to clear the information associated with all entries.
Click the View Detail button to view more detailed information about the link-trace entry.
After clicking the View Detail button, the following page will appear.
Figure 10-13 CFM Linktrace Settings Window
Description
Enter the destination MAC address here.
Enter the MEP's ID here used to initiate the link-trace feature. The
range is from 1 to 8191.
Enter the MA's name here. The name can be up to 22 characters long.
Enter the MD's name here. The name can be up to 22 characters long.
Enter the link-trace message's TTL value here. The range is from 2 to
255. The default value is 64.
Select the 802.1p priority to be set in the transmitted LBMs here. If not
specified, it uses the same priority as the CCMs and LTMs sent by the
MA. The range is from 0 to 7. Select the None option to use the default
setting.
Description
Enter the MEP's ID here. The range is from 1 to 8191.
Enter the MA's name here. The name can be up to 22 characters long.
Enter the MD's name here. The name can be up to 22 characters long.
548