D-Link DXS-3600 Series Reference Manual page 227

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
OSPFv2 Neighbor Table
This window is used to display information of OSPF neighbors.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 Neighbor Table, as
shown below:
The fields that can be configured in OSPF Neighbor Table are described below:
Parameter
VRF
Interface VLAN
Neighbor
Click the Find button to locate a specific entry based on the information entered.
After clicking the Select VRF button, the following page will appear.
The fields that can be configured are described below:
Parameter
VRF
Click the OK button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 6-65 OSPFv2 Neighbor Table Window
Description
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long. Alternatively, click the Select VRF button
to open a new window to select and use a configured VRF instance
from the list.
Enter the VLAN interface's ID that will be used in this display here. The
range is from 1 to 4094.
Enter the neighbor's ID here.
Figure 6-66 OSPFv2 Neighbor Table (Select VRF) Window
Description
Select the VRF instance from the list that will be used here.
216