D-Link DXS-3600 Series Reference Manual page 64
Layer 2/3 managed 10gigabut ethernet switch
Hide thumbs
Also See for DXS-3600 Series:
- Cli reference manual (1456 pages) ,
- Reference manual (1328 pages) ,
- Hardware installation manual (55 pages)
Table of Contents
Advertisement
DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.
After clicking the Configure button, the following page will appear.
Figure 4-30 DHCP Server Pool Settings (Configure) Window
The fields that can be configured in DHCP Server Pool Configure are described below:
Parameter
VRF Name
Boot File
Domain Name
Network (IP/Mask)
Next Server
Default Router
DNS Server
Netbios Name Server
Description
Enter the VRF instance's name that will be used in this configuration
here. This name can be up to 12 characters long.
Enter the boot file's name here. This name can be up to 64 characters
long.
Enter the domain name for the DHCP client here. This name can be up
to 64 characters long.
Enter the network IPv4 address and subnet mask for the DHCP client
here.
Enter the next server's IPv4 address here. This parameter is used to
specify the server IP address for the client to boot the image. The
server is typically a TFTP server. Only one boot server can be
specified.
Enter the IPv4 address of the default router for the DHCP client here.
Up to 8 IPv4 address can be entered here. The IP address of the
router should be on the same subnet as the client's subnet. Routers
are listed in the order of preference. If default routers are already
configured, the default routers configured later will be added to the
default interface list.
Enter the IPv4 address to be used by the DHCP client as the DNS
server here. Up to 8 IPv4 address can be entered here. Servers are
listed in the order of preference. If DNS servers are already configured,
the DNS servers configured later will be added to the DNS server list.
Enter the WINS name server's IPv4 address for the DHCP client here.
Up to 8 IPv4 address can be entered here. Servers are listed in the
order of preference. If name servers are already configured, the name
53
Advertisement
Table of Contents
