Tacacs Group Server Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in TACACS Server Settings are described below:
Parameter
IP Address
IPv6 Address
Port
Timeout
Key Type
Key
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.

TACACS Group Server Settings

This window is used to view and configure the TACACS group server settings.
To view the following window, click Security > TACACS > TACACS Group Server Settings, as shown
below:
The fields that can be configured in TACACS Group Server Settings are described below:
Parameter
Group Server Name
VRF Name
Figure 9-34 TACACS Server Settings Window
Description
Enter the TACACS server's IPv4 address here.
Enter the TACACS server's IPv6 address here.
Enter the port number used here. This value must be between 1 and
65535. By default, this value is 49.
Enter the timeout value here. This value must be between 1 and 255
seconds. By default, this value is 5 seconds.
Select the key type that will be used here. Options to choose from are
Plain Text and Encrypted.
Enter the key, used to communicate with the TACACS server, here.
This key can be up to 254 characters long.
Figure 9-35 TACACS Group Server Settings Window
Description
Enter the TACACS group server's name here. This name can be up to
32 characters long.
Enter the VRF instance's name that will be used in this configuration
487