D-Link DXS-3600 Series Reference Manual page 586

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Policy Name
Trust EXP
IP
Mask
VC
VC ID
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to delete all the entries configured.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
Figure 11-15 MPLS QoS Settings Window
Description
Enter the MPLS QoS policy's name here. This name can be up to 32
characters long. The MPLS QoS policy can be applied to MPLS FECs.
Select to enable or disable the trust EXP feature here. If the EXP is
trusted, the matched packets are scheduled according to the EXP to
the priority mapping of the MPLS QoS policy. Otherwise, the packets
are scheduled according to the 802.1p priority.
Enter the FEC's IP address here associated with the QoS policy.
Enter the FEC's subnet mask here associated with the QoS policy.
Enter the FEC's VC address here associated with the QoS policy.
Enter the FEC's VC ID here associated with the QoS policy.
575