D-Link DXS-3600 Series Reference Manual page 647
Layer 2/3 managed 10gigabut ethernet switch
Hide thumbs
Also See for DXS-3600 Series:
- Cli reference manual (1456 pages) ,
- Reference manual (1328 pages) ,
- Hardware installation manual (55 pages)
Table of Contents
Advertisement
DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Log Description
portNum: 1.Interger value;2.Represent the logic port number of the device.
link state: for ex: , 100Mbps FULL duplex
Event description: Port link down.
Log Message: Port < interface-id > link down
Parameters description:
portNum: 1.Interger value;2.Represent the logic port number of the device.
IP Directed-Broadcast
Log Description
Event description: IP Directed-broadcast rate exceed 50 packets per second on a
certain subnet.
Log Message: IP Directed Broadcast packet rate is high on subnet. [(IP: <ipaddr>)]
Parameters description:
IP: the Broadcast IP destination address.
Event description: IP Directed-broadcast rate exceed 100 packets per second
Log Message: IP Directed Broadcast rate is high.
Parameters description:
LACP
Log Description
Event description: Link Aggregation Group link up.
Log Message: Link Aggregation Group < group_id > link up.
Parameters description:
group_id: The group id of the link down aggregation group.
Event description: Link Aggregation Group link down.
Log Message: Link Aggregation Group < group_id > link down.
Parameters description:
group_id: The group id of the link down aggregation group.
Event description: Member port attach to Link Aggregation Group.
Log Message: <ifname> attach to Link Aggregation Group <group_id>.
Parameters description:
ifname: The interface name of the port that attach to aggregation group.
group_id: The group id of the aggregation group that port attach to.
Event description: Member port detach from Link Aggregation Group.
Log Message: <ifname> detach from Link Aggregation Group <group_id>.
Parameters description:
ifname: The interface name of the port that detach from aggregation group.
group_id: The group id of the aggregation group that port detach from.
LBD
Log Description
Event description: Record the event when an interface detect loop.
636
Severity
Informational
Severity
Informational
Informational
Severity
Informational
Informational
Informational
Informational
Severity
Critical
Advertisement
Table of Contents
