Queue Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.

Queue Settings

This window is used to view and configure the queue settings.
To view the following window, click QoS > Basic Settings > Queue Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port ~ To Port
Queue ID
Description
different based on the user configuration.
To set a CoS queue in the SP mode, any higher priority CoS
queue must also be in the strict priority mode.
•
Enhanced Transmission Selection (ETS) provides bandwidth
allocation on converged links in end stations and bridges in a
Data Center Bridging (DCB) environment. Using bandwidth
allocations, different traffic classes within different traffic types
such as LAN, SAN, IPC and management can be configured to
provide bandwidth allocation, low-latency or best effort transmit
characteristics.
Figure 7-3 Queue Settings Window
Description
Select the switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Enter the queue ID value here. This value must be between 0 and 7.
320