Security > Network Access Authentication > Network Access Authentication Port Settings - D-Link DXS-1210-10TS User Manual

D-Link DXS-1210 Series User Manual
General Settings:
Deny MAC–Move: Select to enable or disable the Deny MAC-Move feature here. This option controls
whether authenticated hosts can move between switch ports and whether a host configured for multi-
authenticate mode can move to another port.
If a station is allowed to move, it may either need to be re-authenticated or can move without re-
authentication, depending on the configuration of the port it is moving to. If the new port has the same
authentication configuration as the original port, then re-authentication is not required. If the port has different
authentication configuration, then re-authentication is needed.
If this feature is disabled and an authenticated host moves to another port, then this is treated as a violation
error.
Authorization State: Select to enable or disable the Authorized State. This is used to enable or disable the
acceptance of an authorized configuration and apply this to the host or port. When authorization state is
enabled, the attributes assigned by the RADIUS server, for example: VLAN, 802.1p default priority,
bandwidth, and ACL will be accepted.
The bandwidth and ACL attributes are assigned on a per-port basis. If the Network Access Authentication
Port Settings Host Mode is set to Multi Auth, the VLAN and 802.1p attributes are assigned on a per-host
basis.
Click the Apply button to accept the changes made.
User Information:
User Name: Enter the user name used here. This name can be up to 32 characters long.
VID (1-4094): Enter the VLAN ID used here.
Password Type: Select the password type option here. Options to choose from are Plain Text and
Encrypted.
Password: Enter the password used here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Security > Network Access Authentication > Network Access Authentication Port Settings
The Network Access Authentication Port Settings page is used to view and configure the network access
authentication port settings.
Figure 4.184 – Security > Network Access Authentication > Network Access Authentication Port Settings
112