Qcn Cnpv Interface Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Click the Apply button to accept the changes made.

QCN CNPV Interface Settings

This window is used to view and configure the QCN CNPV interface settings.
To view the following window, click QoS > QCN > QCN CNPV Interface Settings, as shown below:
The fields that can be configured in QCN CNPV Interface Settings are described below:
Parameter
Unit
From Port ~ To Port
CNPV
Defense Mode Choice
Admin Defense Mode
Figure 7-32 QCN CNPV Interface Settings Window
Description
Select the switch's unit ID that will be used here.
Select the switch's port range that will be used here.
Select the CNPV value that will be used on the specified port(s) here.
The range is from 0 to 7.
Select the defense mode choice that will be used on the specified
port(s) here. Options to choose from are Admin, Auto, and Comp.
•
Admin: Specifies that the default CND defense mode and
alternate priority are specified by administrator.
•
Auto: Specifies that the default CND defense mode and
alternate priority are controlled automatically.
•
Comp: Specifies that the default CND defense mode and
alternate priority are determined by global setting. This is the
default option.
Select the admin defense mode that will be used on the specified
port(s) here. Option to choose from are Disabled, Interior, Interior-
ready, and Edge.
•
Disable: Specifies that the congestion notification capability is
administratively disabled for this priority. This is the default
option.
•
Interior: Specifies that the priority parameter of frame input is
not remapped to or from this priority and the frames are
transmitted without a CN-TAG.
•
Interior-ready: Specifies that the priority parameter of frame
input is not remapped to or from this priority and the CN-TAGs
won't be stripped off when transmitting the frames.
345