DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Network QoS Policy Binding
This window is used to view and configure the network QoS policy's binding settings.
To view the following window, click QoS > QoS PFC > Network QoS Policy Binding, as shown below:
The fields that can be configured in Network QoS Policy Binding Setting are described below:
Parameter
Unit
From Port ~ To Port
Direction
Network QoS Policy Map
Name
Click the Apply button to accept the changes made.
WRED
WRED Profile
This window is used to view and configure the Weighted Random Early Detection (WRED) feature's
profile settings.
To view the following window, click QoS > WRED > WRED Profile, as shown below:
Figure 7-22 Network QoS Policy Binding Window
Description
Select the switch's unit ID that will be used here.
Select the switch's port range that will be used here.
Select the direction here. Options to choose from are Input and
Output.
•
Input: Specifies to apply the policy map for ingress flow on the
interface.
•
Output: Specifies to apply the policy map for egress flow on the
interface.
Enter the network QoS policy map's name here. This name can be up
to 32 characters long. Select the None option to not associate this
configuration with a network QoS policy map.
337