D-Link DXS-3600 Series Reference Manual page 117

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

The fields that can be configured are described below:

Acceptable Frame

Ingress Checking

VLAN Precedence

Allowed VLAN Range

From Port ~ To Port

Click the Apply button to accept the changes made.

Click the Back button to discard the changes made and return to the previous page.

When Promiscuous was selected as the VLAN Mode, the following page will appear.

The fields that can be configured are described below:

Figure 5-22 VLAN Interface (802.1Q-Tunnel) Window

Select the VLAN mode option here. Options to choose from are

Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk

Promiscuous, and Trunk Secondary.

Select the acceptable frame behavior option here. Options to choose

from are Tagged Only, Untagged Only, and Admit All.

Select to enable or disable the ingress checking function.

Select the VLAN precedence option here. Options to choose from are

Mac-based VLAN and Subnet-based VLAN.

Enter the VLAN ID used for this configuration here. This value must be

between 1 and 4094.

Select Add to add a new entry based in the information entered.

Select Remove to remove an entry based in the information entered.

Select to add an Untagged parameter.

Enter the allowed VLAN range information here.

Select this option to enable the clone feature.

Select the range of ports that will be used in the clone feature here.

Figure 5-23 VLAN Interface (Promiscuous) Window