D-Link DXS-3600 Series Reference Manual page 108

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
To view the following window, click L2 Features > VLAN > 802.1v Protocol VLAN > Protocol VLAN
Profile, as shown below:
The fields that can be configured are described below:
Parameter
Profile ID
Frame Type
Ether Type
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Protocol VLAN Profile Interface
This window is used to view and configure the protocol VLAN profile's interface settings.
To view the following window, click L2 Features > VLAN > 802.1v Protocol VLAN > Protocol VLAN
Profile Interface, as shown below:
The fields that can be configured are described below:
Parameter
Port
Figure 5-9 Protocol VLAN Profile Window
Description
Enter the 802.1v protocol VLAN profile ID here. This value must be
between 1 and 16.
Select the frame type option here. This function maps packets to
protocol-defined VLANs by examining the type octet within the packet
header to discover the type of protocol associated with it. Options to
choose from are Ethernet 2, SNAP, and LLC.
Enter the Ethernet type value for the group here. The protocol value is
used to identify a protocol of the frame type specified. The form of the
input is 0x0 to 0xFFFF. Depending on the frame type, the octet string
will have one of the following values:
•
For Ethernet 2, this is a 16-bit (2-octet) hex value. For example,
IPv4 is 0800, IPv6 is 86DD, ARP is 0806, etc...
•
For IEEE802.3 SNAP, this is a 16-bit (2-octet) hex value.
•
For IEEE802.3 LLC, this is a 2-octet IEEE 802.2 Link Service
Access Point (LSAP) pair. The first octet is for Destination
Service Access Point (DSAP) and the second octet is for Source.
Figure 5-10 Protocol VLAN Profile Interface Window
Description
Select the stacking unit ID and the port number of the switch that will
97