D-Link DXS-3600 Series Reference Manual page 167

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in Group Profile Settings are described below:
Parameter
Profile Name
Action
Address Type
From IP Address
To IP Address
Click the Apply button to accept the changes made.
The fields that can be configured in Access Group Settings are described below:
Parameter
VID
Profile Name
Action
Figure 5-70 Multicast VLAN Group Settings Window
Description
Enter the group profile name for the multicast VLAN feature here. This
name can be up to 32 characters long.
Select the action that will be taken here. Options to choose from are
Add and Delete. Multiple ranges can be added to a multicast VLAN
profile. The IP address ranges, specified in a single profile, must be of
the same address family.
Select the address type here. Options to choose from are IPv4 and
IPv6.
•
IPv4: Specifies to use IPv4 multicast addresses in the range.
•
IPv6: Specifies to use IPv6 multicast addresses in the range.
Enter the source IPv4/IPv6 address here.
Enter the destination IPv4/IPv6 address here.
Description
Enter the multicast VLAN's ID that will be used here. The range is 1 to
4094.
Enter the group profile name for the multicast VLAN feature here. This
name can be up to 32 characters long.
Select the action that will be taken here. Options to choose from are
Add and Delete. This is to add or delete the multicast group entirely.
156