DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in DHCP Relay Pool Settings are described below:
Parameter
Pool Name
Click the Apply button to accept the changes made.
Click the Edit button to modify the corresponding information of the specific DHCP pool.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button under Source, the following window will appear.
Figure 4-44 DHCP Relay Pool Settings (Source Edit) Window
The fields that can be configured in DHCP Relay Pool Source Settings are described below:
Parameter
Source IP Address
Subnet Mask
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.
After clicking the Edit button under Destination, the following window will appear.
Figure 4-43 DHCP Relay Pool Settings Window
Description
Enter the address pool name with a maximum of 32 characters.
Description
Enter the source subnet of client packets.
Enter the network mask of the source subnet.
62