D-Link DXS-3600 Series Reference Manual page 164

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > Multicast
VLAN Settings, as shown below:
The fields that can be configured in Multicast VLAN Global Settings are described below:
Parameter
Multicast VLAN IPv4 State
Forward Unmatched
Multicast VLAN IPv6 State
Ignore VLAN
VID
VLAN Name
Figure 5-69 Multicast VLAN Settings Window
Description
Select to enable or disable the IPv4 IGMP control packet process in
multicast VLANs.
Select the enable or disable the forward unmatched feature here. This
specifies that if the received IGMP or MLD control packet is untagged,
does not match any profile, and the associated default VLAN is a
multicast VLAN, or is tagged with a multicast VLAN, but does not
match the associated profile, then the packet will be forwarded or
dropped based on this setting. By default, the packet will be dropped.
Select to enable or disable the IPv6 IGMP control packet process in
multicast VLANs.
Select the enable or disable the ignore VLAN feature here. This
specifies the setting for tagged IGMP or MLD control packets. If
enabled, then the packet's VLAN is ignored and taken to match the
profile to find its multicast VLAN. When this option is enabled, the
switch will ignore the VLAN of the receiving IGMP or MLD control
packet and try to find a match profile.
Enter the VLAN ID of the multicast VLAN that will be created or
deleted here. The range is 2 to 4094.
Enter the VLAN name of the multicast VLAN that will be created or
deleted here.
153