System Log - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Host IPv4 Address
Host IPv6 Address
UDP Port
Severity
Facility
Discriminator Name
VRF Name
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified entry.

System Log

This window is used to view and clear the system log.
To view the following window, click System > System Log > System Log, as shown below:
Click the Clear Log button to clear the system log entries displayed in the table.
Figure 3-19 System Log Server Settings Window
Description
Enter the system log server's IPv4 address here.
Enter the system log server's IPv6 address here.
Enter the system log server's UDP port number here. This value must
be between 1024 and 65535. By default, this value is 514.
Select the severity value of the type of information that will be logged.
Options to choose from are 0 (Emergencies), 1 (Alerts), 2 (Critical),
3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7
(Debugging).
Select the facility value here. Options to choose from are 0 to 23.
Enter the discriminator name here. This name can be up to 15
characters long.
Enter the VRF name that will be associated with this configuration
here.
Figure 3-20 System Log Window
25