Vrrp Settings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Route Map
Click the Apply button to accept the changes made.

VRRP Settings

This window is used to view and configure the Virtual Router Redundancy Protocol (VRRP) feature's
settings. All routers in the same VRRP group must be configured with the same virtual router ID and IP
address.
A virtual router group is represented by a virtual router ID. The IP address of the virtual router is the
default router configured on hosts. The virtual router's IP address can be a real address configured on the
routers, or an unused IP address. If the virtual router address is a real IP address, the router that has this
IP address is the IP address owner.
A master will be elected in a group of routers that supports the same virtual routers. Others are the
backup routers. The master is responsible for forwarding the packets that are sent to the virtual router.
To view the following window, click L3 Features > VRRP Settings, as shown below:
The fields that can be configured in VRRP Settings are described below:
Figure 6-191 Policy Route (Edit) Window
Description
Enter the route map's name here that will be used in this policy route
entry.
Figure 6-192 VRRP Settings Window
315