Acl Vlan Access Map - D-Link DXS-3600 Series Reference Manual

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

The fields that can be configured are described below:

From Port ~ To Port

Click the Apply button to accept the changes made.

ACL VLAN Access Map

This window is used to view and configure the ACL VLAN access map settings.

To view the following window, click ACL > ACL VLAN Access Map, as shown below:

Figure 8-103 ACL Interface Access Group Window

Select the switch unit that will be used for this configuration here.

Select the range of ports that will be used for this configuration here.

Select the direction here. Options to choose from are In and Out.

Select the action that will be taken here. Options to choose from are

Add and Delete.

Select the ACL type here. Options to choose from are IP ACL, IPv6

ACL, MAC ACL, and Expert ACL.

Enter the ACL's name here. This name can be up to 32 characters

long. Click the Please Select button to select an existing ACL from the