D-Link DXS-3600 Series Reference Manual page 275

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6
> PIM for IPv6 SSM Settings, as shown below:
The fields that can be configured in SSM Settings are described below:
Parameter
Multicast Group Address
Name
Click the Add button to add a new entry based on the information entered.
Click the Delete button to delete an entry based on the information entered.
After clicking the Show List button, the following page will appear.
Figure 6-130 PIM for IPv6 SSM Settings (Show List) Window
The fields that can be configured are described below:
Parameter
ACL Type
ACL List
Click the Find button to display a list of access lists based on the selection made.
Click the View All button to display all configured access lists.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the Apply button to use the selected access list.
Figure 6-129 PIM for IPv6 SSM Settings Window
Description
Enter the standard IPv6 access list's name here that defines the user-
specified SSM group addresses. Alternatively, click the Show List
button to find and select any of the exiting access lists configured on
this switch to be used in this configuration. Selecting the Default SSM
Group (FF3x::/32) option specifies to use the default SSM group
addresses. The default SSM group address range is FF3x::/32.
Description
Select the ACL type that will be used to display the type of existing
access lists in the table here. Options to choose from are IP ACL,
Expert IP ACL, IPv6 ACL, Expert IPv6 ACL, MAC ACL, and Expert
ACL.
Select the radio button of the access list in the table that will be used
here.
264