D-Link DXS-3600 Series Reference Manual page 270

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
ACL List
Click the Find button to display a list of access lists based on the selection made.
Click the View All button to display all configured access lists.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the Apply button to use the selected access list.
PIM for IPv6 RP Candidate
This window is used to view and configure the IPv6 PIM RP candidate settings. Only one group access
list can be specified for each interface. The latest configuration overrides the previous one. This feature
can be issued multiple times for different interfaces. This configuration causes the router to send a PIMv2
message advertising itself as a candidate RP to the BSR.
To view the following window, click L3 Features > IP Multicast Routing Protocol > PIM > PIM for IPv6
> PIM for IPv6 RP Candidate, as shown below:
The fields that can be configured in RP Candidate Settings are described below:
Parameter
Interface Name
Group Access List Name
Priority
Interval
Click the Add button to add a new entry based on the information entered.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Description
Select the radio button of the access list in the table that will be used
here.
Figure 6-122 PIM for IPv6 RP Candidate Window
Description
Enter the interface's name here whose IPv6 address will be advertised
as the candidate RP (C-RP).
Enter the standard IPv6 access list that will be used here. Alternatively,
click the Show List button to find and select any of the exiting access
lists configured on this switch to be used in this configuration.
Select the All Groups option to map the candidate RP to all multicast
groups.
Enter the RP's priority value here. The range is from 0 to 255. Select
the Default option to use the default value, which is 192.
Enter the RP candidate's advertisement interval value here. The range
is from 1 to 16383 seconds. Select the Default option to use the
default value, which is 60 seconds.
259