D-Link DXS-3600 Series Reference Manual page 469

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Access Map Name
Sub Map Number
Action
Counter State
Click the Apply button to accept the changes made.
Click the Clear All Counter button to clear the counter information for all the access maps.
Click the Clear Counter button to the clear the counter information for the specified access map.
Click the Find button to locate a specific entry based on the information entered.
Click the Binding button to match an access list to the ACL VLAN access map.
Click the Delete button to remove the specific entry.
After clicking the Binding button, the following window will appear:
Figure 8-104 ACL VLAN Access Map Window
Description
Enter the access map's name here. This name can be up to 32
characters long.
Enter the sub-map's number here. This value must be between 1 and
65535.
Select the action that will be taken here. Options to choose from are
Forward, Drop, and Redirect. When the Redirect option is selected,
select the redirected interface from the drop-down list.
Select whether to enable or disable the counter state.
458