Show Mac-Address-Table Gmrp; Port-Based Network Access Control Commands - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
Leave Timer
LeaveAll Timer This Leave All Time controls how frequently LeaveAll PDUs are gener-
Port GMRP Mode The GMRP administrative mode for the port. It may be enabled or dis-

show mac-address-table gmrp

This command displays the GMRP entries in the Multicast Forwarding Database (MFDB)
table.
Format
Mode
Mac Address A unicast MAC address for which the switch has forwarding and or filtering
Type
Description
Interfaces

Port-Based Network Access Control Commands

This section describes the commands you use to configure port-based network access control
(802.1x). Port-based network access control allows you to permit access to network services
only to and devices that are authorized and authenticated.
72 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
The period of time to wait after receiving an unregister request for an attribute
before deleting the attribute. Current attributes are a VLAN or multicast
group. This may be considered a buffer time for another station to assert regis-
tration for the same attribute in order to maintain uninterrupted service. There
is an instance of this timer on a per-Port, per-GARP participant basis. Permis-
sible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory
default is 60 centiseconds (0.6 seconds).
ated. A LeaveAll PDU indicates that all registrations will shortly be deregis-
tered. Participants will need to rejoin in order to maintain registration. There
is an instance of this timer on a per-Port, per-GARP participant basis. The
Leave All Period Timer is set to a random value in the range of LeaveAllTime
to 1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to
60 seconds). The factory default is 1000 centiseconds (10 seconds).
abled. If this parameter is disabled, Join Time, Leave Time and Leave All
Time have no effect.
show mac-address-table gmrp
Privileged EXEC
information. The format is 6 or 8 two-digit hexadecimal numbers that are sep-
arated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC
address is displayed as 8 bytes.
The type of the entry. Static entries are those that are configured by the end
user. Dynamic entries are added to the table as a result of a learning process or
protocol.
The text description of this multicast table entry.
The list of interfaces that are designated for forwarding (Fwd:) and filtering
(Flt:).