D-Link DXS-3600 Series Reference Manual page 225

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Password
MD5 Key ID
MD5 Key
Click the Apply button to accept the changes made.
The fields that can be configured in OSPF Virtual Link Table are described below:
Parameter
VRF
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to delete the specified entry.
After clicking the Select VRF button, the following page will appear.
The fields that can be configured are described below:
Parameter
VRF
Click the OK button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
OSPFv2 LSDB Table
This window is used to display the OSPFv2 feature's LSDB table and information.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 LSDB Table, as shown
below:
Description
specified for the virtual link, the password authentication type for the
area will be used.
After selecting the Simple Password authentication type, enter the
password used for password authentication here. This password can
be up to 8 characters long.
After selecting the MD5 authentication type, enter the MD5
authentication method's key ID here. The range is from 1 to 255.
After selecting the MD5 authentication type, enter the MD5
authentication method's key here. This key can be up to 16 characters
long.
Description
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long. Alternatively, click the Select VRF button
to open a new window to select and use a configured VRF instance
from the list.
Figure 6-62 OSPFv2 Virtual Link Settings (Select VRF) Window
Description
Select the VRF instance from the list that will be used here.
214