Cpu Protect Type - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in CPU Protect Sub-Interface are described below:
Parameter
Sub-Interface
Rate Limit
Click the Apply button to accept the changes made.
The fields that can be configured in Sub-Interface Information are described below:
Parameter
Sub-Interface
Click the Find button to locate a specific entry based on the information entered.

CPU Protect Type

This window is used to view and configure the CPU protection type settings.
To view the following window, click Security > Safeguard Engine > CPU Protect Type, as shown below:
The fields that can be configured in CPU Protect Type are described below:
Parameter
Protocol Name
Rate Limit
Figure 9-75 CPU Protect Sub-Interface Window
Description
Select the sub-interface option here. Options to choose from are
Manage, Protocol, and Route.
Enter the rate limit value used here. This value must be between 0 and
1024 packets per second. Tick the No Limit option to disable the rate
limit.
Description
Select the sub-interface option here. Options to choose from are
Manage, Protocol, and Route.
Figure 9-76 CPU Protect Type Window
Description
Select the protocol name option here.
Enter the rate limit value used here. This value must be between 0 and
524