D-Link DXS-3600 Series Reference Manual page 551

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Domain Level
Click the Apply button to accept the changes made.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Click the Add MA button to add a new Maintenance Association (MA) rule.
After clicking the Edit button, the following page will appear.
The fields that can be configured in the table are described below:
Parameter
MIP Creation
SenderID TLV
Description
provider or operator. It facilitates easy identification of administrative
responsibility for each maintenance domain.
Enter the Maintenance Domain's (MD's) level here. The range is from
0 to 7. A unique MD level is assigned to define the hierarchical
relationship between domains. The larger range of domain has the
higher value of level.
Figure 10-2 CFM Settings (Edit) Window
Description
Select the Maintenance domain Intermediate Point (MIP) option here.
The creation of MIPs on a maintenance domain is useful for tracing the
link, MIP by MIP. It also allows the user to perform a loopback from an
MEP to an MIP. An enumerated value indicates whether the
management entity can create MIP Half Functions (MHF) for a
maintenance domain.
Options to choose from are None, Auto, and Explicit.
•
None: Specifies not to create the MIP for a maintenance domain.
•
Auto: Specifies that MIPs will always be created on any port in
this maintenance domain, if that port is not configured as an
MEP of this maintenance domain. For an intermediate switch in
an MA, the setting must be automatically in order for the MIPs to
be created on this device.
•
Explicit: Specifies that MIPs can be created on ports that has an
existing lower level MEP configured on it and that the port is not
configured as an MEP of this maintenance domain.
This option is used to configure the default transmission of the sender
ID TLV by MPs in an MD. Select one of the following options:
•
None: Specifies not to transmit the sender ID TLV.
•
Chassis: Specifies to transmit the sender ID TLV with the
chassis ID information.
540