D-Link DXS-3600 Series Reference Manual page 322

Layer 2/3 managed 10gigabut ethernet switch
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
After clicking the Edit button in the Match Clauses column, the following page will appear.
The fields that can be configured are described below:
Parameter
Action
Interface Name
IP Address
IP Address Prefix List
IPv6 Address
IP Next Hop
IP Next Hop Prefix List
IPv6 Next Hop
AS Path
Community
Figure 6-188 Route Map (Match Clauses, Edit) Window
Description
Select Add to add a new entry based in the information entered.
Select Delete to delete an entry based in the information entered.
Select and enter the interface's name that will be used here. This
option is used to define a clause to match the route's outgoing
interface.
Select and enter the standard or extended IP access list's name here.
This option is used to define a clause to match the route based on the
standard or extended IP access list.
Select and enter the IP prefix list's name here. This option is used to
define a clause to match the route based on the IP prefix list.
Select and enter the standard or extended IPv6 access list's name
here. This option is used to define a clause to match the route based
on the standard or extended IPv6 access list.
Select and enter the standard IP access list's name here. This option
is used to define a clause to match the route's next hop based on the
standard IP access list.
Select and enter the next hop IP prefix list's name here. This option is
used to define a clause to match the route's next hop based on the
next hop IP prefix list.
Select and enter the standard IPv6 access list's name here. This
option is used to define a clause to match the route's next hop based
on the standard IPv6 access list.
Select and enter the standard or extended IP/IPv6 access list's name
here. This option is used to define a clause to match the route's AS
path based on the standard or extended IP/IPv6 access list.
Select and enter the standard or extended IP/IPv6 access list's name
here. This option is used to define a clause to match the route's
311

Advertisement

Table of Contents
loading

Table of Contents