Standard Ip Acl - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
ID
ACL Name
Click the Find button to locate a specific entry based on the information entered.
Click the Add ACL button to create a new ACL.
Click the Clear All Counter button to clear all the counter information displayed.
Click the Clear Counter button to clear the counter information for the rule displayed.
Click the Add Rule button to create an ACL rule for the ACL selected.

Standard IP ACL

After clicking the Add ACL button, users can create a new ACL, as shown below:
The fields that can be configured are described below:
Parameter
ACL Type
ID
ACL Name
Click the Apply button to create the new ACL.
After creating a Standard IP ACL, the newly created Standard IP ACL will be displayed in the ACL
display table, as shown below:
Description
ACL, IPv6 ACL, MAC ACL, and Expert ACL.
Select and enter the access list's ID here. The range is from 1 to
14999.
Select and enter the access list's name here. This name can be up to
32 characters long.
Figure 8-31 Standard IP ACL (Add ACL) Window
Description
Select the ACL type here. For this section we'll select the Standard IP
ACL option.
Enter the access list's ID here. The range from 1 to 1999.
Enter the ACL's name here. This name can be up to 32 characters
long.
385