Erps Profile - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
RPL Owner
Activate
Click the Back button to discard the changes made and return to the previous window.
Click the Apply button to accept the changes made.

ERPS Profile

This window is used to view and configure the Ethernet Ring G.8032 profile settings.
To view the following window, click L2 Features > ERPS (G.8032) > ERPS Profile, as shown below:
The fields that can be configured in Ethernet Ring G.8032 Profile are described below:
Parameter
Profile Name
Click the Apply button to associate the G.8032 profile with the ERP instance created.
Click the Edit button to modify the specified G.8032 profile.
Click the Delete button to disassociate the G.8032 profile.
After click the Edit button, the following window will appear.
Description
configured as the RPL port.
Select the checkbox and then select whether this node is the RPL
owner or neighbor. Options to choose from are Enabled and
Disabled. Enabling this option will specify this RPL as an owner.
Select the checkbox and then select whether or not to active this ERP
instance. Options to choose from are Enabled and Disabled. Enabling
this option will active this ERP instance.
Figure 5-47 ERPS Profile Window
Description
Enter the G.8032 profile's name here. This name can be up to 32
characters long. Multiple ERP instances can be associated with the
same G.8032 profile. The instances associated with the same profile
protect the same set of VLANs, or the VLANs protected by one
instance are a subset of LANs protected by another instance.
Figure 5-48 ERPS Profile (Edit) Window
129