Vlan Mapping - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in Dot1q Tunnel Port Settings are described below:
Parameter
Unit
From Port ~ To Port
Trust Inner Priority
Miss Drop
Insert Dot1q Tag
VLAN Mapping Profile
Action
Click the Apply button to accept the changes made.

VLAN Mapping

This window is used to view and configure the VLAN mapping settings. If a profile is applied on an
interface, the switch matches the incoming packets according to the rules of the profile. If the packets
match a rule, the action of the rule will be taken. The action may be adding or replacing the outer-VID.
Optionally, specify the priority of the new outer-TAG or specify the packets new inner-VID.
The match order depends on the rule's sequence number of the profile and stopped when first matched.
If the sequence number is not specified, it will be allocated automatically. The sequence number begins
from 10 and the increment is 10. Multiple different types of profiles could be configured onto one interface.
To view the following window, click L2 Features > VLAN Tunnel > VLAN Mapping, as shown below:
Figure 5-31 Dot1q Tunnel Settings (Dot1q Tunnel Port Settings) Window
Description
Select the switch's unit ID that will be used here.
Select the switch's port range that will be used here.
Select to enable or disable the 802.1Q inner trust priority feature here.
When the trusting priority option, on an 802.1Q tunnel port, is enabled
the priority of the VLAN tag in the received packets will be copied to
the service VLAN tag.
Select to enable or disable the miss drop feature here. If the VLAN
mapping miss drop option is enabled on the receiving port, when the
original VLAN of the received packets cannot match the VLAN
mapping entries or rules on this port, the received packets will be
dropped.
Enter the 802.1Q VLAN ID that is inserted to the untagged packets
which are received on the 802.1Q tunnel port(s) here. The range is
from 1 to 4094.
Enter the ID of the VLAN mapping profile here. A lower ID has a higher
priority. The ID range is from 1 to 1000.
Select Add to add a new entry based in the information entered.
Select Remove to remove an entry based in the information entered.
114