D-Link DXS-3600 Series Reference Manual page 230

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in OSPFv3 Process Table are described below:
Parameter
Router ID
Default Metric
Type
Distance
Auto Bandwidth
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Process ID's link (1) in the table, the following page will appear.
Figure 6-70 OSPFv3 Process Settings (Edit) Window
Description
Enter the router ID for the OSPF process here.
Enter the default metric value for the OSPF process here. The range is
from 1 to 16777214. By default, this value is 20. This value is used in
conjunction with the OSPFv3 redistribute feature to cause the current
routing protocol to use the same metric value for all redistributed
routes. A default metric helps solve the problem of redistributing routes
with incompatible metric. Whenever metrics don't convert, using a
default metric provides a reasonable substitute and enables the
redistribution to proceed.
Select the distance type here. Options to choose from are Inter-Area,
Inter-Area, and External.
•
Intra-Area: Specifies the distance for OSPF intra-area routes.
•
Inter-Area: Specifies the distance for OSPF inter-area routes.
•
External: Specifies the distance for OSPF external routes.
Enter the distance value for the OSPF process here. The range is from
1 to 254. By default, this value is 110 for all OSPF routes.
Enter the auto-bandwidth value here. This feature is used to control
the reference value IPv6 OSPF uses when calculating metrics for
interfaces.
219