D-Link DXS-3600 Series Reference Manual page 137

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in ERPS Global Settings are described below:
Parameter
ERPS Trap Status
Click the Apply button to accept the changes made.
The fields that can be configured in Ethernet Ring G.8032 are described below:
Parameter
Ring Name
Click the Apply button to create an ITU-T G.8032 ERP physical ring.
Click the Edit Ring button to modify an ITU-T G.8032 ERP physical ring.
Click the Show Detail button to view the ITU-T G.8032 ERP physical ring's status information.
Click the Delete button to delete the specified ITU-T G.8032 ERP physical ring.
After click the Edit Ring button, the following window will appear.
The fields that can be configured in Ethernet Ring Settings are described below:
Parameter
Instance ID
Figure 5-43 ERPS Window
Description
Select to enable or disable the ERPS trap status here.
Description
Enter the Ethernet Ring Protection (ERP) instance's name here. This
name can be up to 32 characters long.
Figure 5-44 ERPS (Edit Ring) Window
Description
Select the checkbox and enter the ERP instance number here. This
value must be between 1 and 32. Select the Specify radio button to
configure this parameter as per normal. Select the None radio button
to revert this parameter to the default setting.
126