D-Link DXS-3600 Series Reference Manual page 290

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Address Family
Source Protocol
Destination Protocol
Type
Metric
Route Map Name
Click the Apply button to accept the changes made.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
Figure 6-151 BGP Route Redistribution Settings (Edit) Window
The fields that can be configured in the table are described below:
Description
Select the address family used here. Options to choose from are IPv4
Unicast and IPv4 VRF.
After selecting the IPv4 VRF option, enter the VRF instance's name
that will be used here. This name can be up to 12 characters long.
Alternatively, click the Please Select button to open a new window to
select and use a configured VRF instance from the list.
Select the source protocol that will be redistributed to BGP here.
Options to choose from are Connected, Static, RIP, OSPF, and ISIS.
This field specifies the destination protocol which is BGP.
After selecting OSPF as the source protocol the OSPF type can be
selected here. Options to choose from are All, External, Internal+E1,
Internal+E2, Internal, External Type-1, and External Type-2.
•
All: Specifies to redistribute both OSPF AS-internal and OSPF
AS-external routes to BGP.
•
External: Specifies to redistribute only the OSPF AS-external
routes, including type-1 and type-2 routes.
•
Internal+E1: Specifies to redistribute only the OSPF AS-external
type-1 and OSPF AS-internal routes.
•
Internal+E2: Specifies to redistribute only the OSPF AS-external
type-2 and OSPF AS-internal routes.
•
Internal: Specifies to redistribute only the OSPF AS-internal
routes.
•
External Type-1: Specifies to redistribute only the OSPF AS-
external type-1 routes.
•
External Type-2: Specifies to redistribute only the OSPF AS-
external type-2 routes.
Enter the BGP metric value for the redistributed routes here. The
range is from 0 to 4294967295.
Enter the route map's name here used to filter the networks to be
redistributed. If not specified, all networks are redistributed.
279