D-Link DXS-3600 Series Reference Manual page 496

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in RADIUS Group Server Settings are described below:
Parameter
Group Server Name
IP Address
IPv6 Address
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Click the Detail button to view and configure more detailed settings for the RADIUS group server.
After clicking the Detail button, the following page will be available.
Figure 9-32 RADIUS Group Server Settings (Detail) Window
The fields that can be configured in Group Server NameGroup-Server are described below:
Parameter
VRF Name
Click the Apply button to accept the changes made.
The fields that can be configured in Group Server NameGroup-Server are described below:
Parameter
IPv4 RADIUS Source Interface
VLAN
IPv6 RADIUS Source Interface
VLAN
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.
Description
Enter the RADIUS group server's name here. This name can be up to
32 characters long.
Enter the group server's IPv4 address here.
Enter the group server's IPv6 address here.
Description
Enter the VRF instance's name that will be used in this configuration
here. This name can be up to 12 characters long.
Description
Enter the source IPv4 RADIUS interface's interface VLAN ID here.
Enter the source IPv6 RADIUS interface's interface VLAN ID here.
485