D-Link DXS-3600 Series Reference Manual page 341

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Aggregate Policer Name
Average Rate
Normal Burst Size
Maximum Burst Size
Confirm Action
Exceed Action
Violate Action
Description
Enter the aggregate policer's name here.
Enter the average rate value here. This value must be between 0 and
10000000 kbps.
Enter the normal burst size value here. This value must be between 0
and 16384 Kbytes.
Enter the maximum burst size value here. This value must be between
0 and 16384 Kbytes.
Select the confirm action here. The confirm action specifies the action
to take on green color packets. If the confirm action is not specified,
the default action is to Transmit. Options to choose from are Drop,
Set-DSCP-Transmit, Set-1P-Transmit, Transmit, and Set-DSCP-1P.
•
When selecting the Drop option, the packet will be dropped.
•
When selecting the Set-DSCP-Transmit option, enter the IP
DSCP value in the space provided. This value sets the IP
differentiated services code point (DSCP) value and transmits
the packet with the new IP DSCP value.
•
When selecting the Set-1P-Transmit option, enter the 1P
transmit value in the space provided. This value sets the 802.1p
value and transmits the packet with the new value.
•
When selecting the Set-DSCP-1P option, enter the IP DSCP and
1P transmit values in the spaces provided.
•
When selecting the Transmit option, packets will be transmitted
unaltered.
Select the exceed action here. The exceed action specifies the action
to take on packets that exceed the rate limit. For a two rate policer, if
the exceed action is not specified, the default action is Drop. Options
to choose from are Drop, Set-DSCP-Transmit, Set-1P-Transmit,
Transmit, and Set-DSCP-1P.
•
When selecting the Drop option, the packet will be dropped.
•
When selecting the Set-DSCP-Transmit option, enter the IP
DSCP value in the space provided. This value sets the IP
differentiated services code point (DSCP) value and transmits
the packet with the new IP DSCP value.
•
When selecting the Set-1P-Transmit option, enter the 1P
transmit value in the space provided. This value sets the 802.1p
value and transmits the packet with the new value.
•
When selecting the Set-DSCP-1P option, enter the IP DSCP and
1P transmit values in the spaces provided.
•
When selecting the Transmit option, packets will be transmitted
unaltered.
Select the violate action here. The violate action specifies the action to
take on packets that violate the normal and maximum burst sizes for
singe rate policing. It specifies the action to take for those packets that
did not conform to both CIR and PIR. For a single rate policer, if the
violate action is not specified, it will create a single-rate two-color
policer. For a two-rate policer, if the violation action is not specified, the
default action is equal to the exceed action. Options to choose from
are Drop, Set-DSCP-Transmit, Set-1P-Transmit, Transmit, and Set-
DSCP-1P.
•
When selecting the Drop option, the packet will be dropped.
•
When selecting the Set-DSCP-Transmit option, enter the IP
DSCP value in the space provided. This value sets the IP
differentiated services code point (DSCP) value and transmits
the packet with the new IP DSCP value.
•
When selecting the Set-1P-Transmit option, enter the 1P
330