D-Link DXS-3600 Series Reference Manual page 386

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Destination Port

Click the Back button to return to the previous window.

Click the Next button to continue.

Protocol Type - UDP

After selecting the UDP option as the Protocol Type, the following section will appear.

port number(s) is/are not available in the drop-down list.

Select and enter the destination port value here. Options to choose

from are =, >, <, ≠, and Range. When selecting the = option, the

specific selected port number will be used. When selecting the >

option, all ports greater than the selected port, will be used. When

selecting the < option, all ports smaller than the selected port, will be

used. When selecting the ≠ option, all ports, excluding the selected

port, will be used. When selecting the Range option, the start port

number and end port number selected, of the range, will be used.

Alternatively, the port number(s) can manually be entered in the

space(s) provided, if the port number(s) is/are not available in the

drop-down list.

Select or enter the DSCP value used here. This value must be

between 0 and 63.

Tick the appropriate TCP flag option to include the flag in this rule.

Options to choose from are ack, fin, psh, rst, syn, and urg.

Enter the flow label value here. This value must be between 0 and

Enter the name of the time range to associate with this ACL rule.

Select the action that this rule will take here. Options to choose from

are Permit and Deny.